Datasheet

11.7.2019 PeakTech® 2695 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/id-2-in-1-dmmisolationstester/produkt/p-2695.html 1/2
BACK
PeakTech_2695_01-2019F.pdf (778.0 kB)
MANUAL
2695_L.jpg (236.8 kB)
2695_R.jpg (222.5 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Insulation tester DMM Insulation Tester PeakTech® 2695
PeakTech
®
2695 PROD-ID: P 2695
Digital Isolation Tester, 3 ½-digit, 125/250/500/1000 V;
4000 MΩ
Very electrical apparatus and installation need to be safe for the user
and for the equipment itself. Electrical conductors of electricity need to
be insulated from each other, so that they do not create electrical
hazard or unnecessary consumption. Badly insulated circuits can create
leakage current which can be dangerous and trip your GFCI, RCCB or
ELCB. Each country regulate those levels at which the insulation is
acceptable. Check the continuity of wires, complete circuits
connections, closure of contacts, circuit breakers, fuses, bounding
resistance of connections, etc. are all very important.
Large dual LC-display with analogue bargraph and backlight
MIN/MAX recording and DATA-Hold
Auto-discharge of capacitive voltage for added user protection
Live circuit detection prevents insulation test if voltage >30 V is
detected
Low battery indication
Auto power off
Safety: TÜV/GS, EN-61010-1; CAT III 1000 V
Accessories: case, batteries, test leads and manual