Datasheet
17.9.2019 PeakTech® 2715 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/fi-tester-und-schleifenimpedanz-messgeraete/produkt/peaktech-2715.html 1/2
BACK
PeakTech 2715_06-2019F.pdf (775.9 kB)
MANUAL
2715_back.jpg (240.7 kB)
2715_case.jpg (703.7 kB)
2715_front.jpg (313.0 kB)
2715_Left.jpg (466.8 kB)
2715_packing.jpg (629.7 kB)
2715_right.jpg (372.0 kB)
2715_Use.jpg (937.6 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: 0049 4102 42343/44
Fax: 0049 4102 43416
Products RCD- and Loop- Testers PeakTech® 2715
PeakTech
®
2715 PROD-ID: P 2715
Digital Loop / PSC Tester
Loop testers or loop testers are used to test the safety of electrical
systems. These devices measure the impedance of the short-circuit loop
between the outer conductors of a circuit, calculating the Prospective
Short-circuit Current (PSC). The protection of the circuit (circuit
breaker) must therefore trigger at a lower current than the prospective
short-circuit current to avoid excessive heating of the lines and thus a
fire hazard.
3 1/2-digit LCD display with backlight
For measuring the loop impedance
For measuring the anticipated short-circuit current
Check mains and proper wiring before measurement
Safety: EN-61010-1; CAT III 600 V, double insulated housing
Accessories: Carrying case, Test leads, Batteries and User manual
Available: August 2019
