Datasheet

11.7.2019 PeakTech® 2755 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/vde-0100-pruefgeraet/produkt/peaktech-2755.1005.html 1/2
BACK
PeakTech_2755_06-2018F.pdf (3,252.6 kB)
MANUAL
2755_F.jpg (340.8 kB)
Menues Kopie.jpg (120.6 kB)
P2755 Banner.jpg (393.6 kB)
P2755 Front und Zubehoer komplett.jpg (496.8 kB)
P2755_Smartphone.jpg (395.3 kB)
PICTURE
Android_PeakTech 2755 App (Bluetooth 4.0)_09-
2016_v1.4.rar (6,617.2 kB)
iOS_PeakTech 2755 App_06-2015.rar (3,071.1 kB)
Windows_Driver_Bluetooth_4.0_BLE_TiCC2540.rar
(23.4 kB)
Windows_PeakTech 2755 Software (Bluetooth
3.0)_07-2014_V1.0.rar (54,619.7 kB)
Windows_PeakTech 2755 Software (Bluetooth
4.0)_01-2017_v1.4.rar (3,978.5 kB)
SOFTWARE
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Safety & Installation Testers VDE 0100 Safety Tester PeakTech® 2755
PeakTech
®
2755 PROD-ID: P 2755
Installation Safety Tester ~ TFT-Color Display ~ SD-Card ~
USB ~ Bluetooth
This innovative combination meter for testing electrical installations
according to VDE 0100 convinces by its technical performance in the
high-end range.
With the large 3.5 "TFT color display all important safety checks as the
RCD-, Voltage-, Loop-, Low-Ohm, Earth resistance and Insulation tests
for annual safety-checks and newly installed systems can safely be
carried out by the responsible electrical engineer.
Since this new development was designed only according to the latest
standards, the required measuring values can be even more convenient
stored with an App (iOS / Android) via Bluetooth on the mobile phone,
saved to an SD card or, when work is completed, from the internal data
memory via USB connection to a PC.
Of course, the device is already equipped with an extensive range of
accessories, all required test leads and any necessary software CD. An
App for mobile phones can be downloaded additonally.
The built-in help function can display each measurement function with a
connection-sketch, how a test must be carried out. Trough this and the
graphical user interface, the device is easy to handle and applicable for
all qualified electric personnel, technicians and engineers.
To ensure a daily use, this device is powered by standard rechargeable
Ni-Mh batteries, which can be loaded built-in the device. Additional
charged batteries can be carried with the user to always ensure the
applicability or to extend the already high average operating time of 15
hours even during longer missions. Also this device can be recharged
from the mains or by a 12V car adapter.
During use, this high quality unit is protected by its IP 65 protection
rating against dust, jets of water on all sides and can be transported in
the included carrying case safely. During the measurement process it can
also safely be held comfortable with a carrying strap.
8.9 cm (3.5 ") TFT color display with backlight
For measurements according to DIN VDE 0100/0413, EN 61557-6, EN
61008, EN 61009 and IEC 60364
Bluetooth interface for data transfer to a smart phone via Android or
iOS App
USB interface for evaluation on PC
Internal memory and SD card for data recording
Safety: EN 61010-1 ; CAT III 600 V, TÜV/GS
Accessories: Carrying case, Strap, Test leads, Test clips, Insulation-Probe, Universal charger, Earthingrod, Car charger,
rechargeable Batteries, Manual and Software CD