Datasheet

5.2.4 Using the L- N Line Impedance Measurement
L-N Line – Standby screen
1. Turn the rotary switch to the LOOP / PSC position
2. Press F1 button to change from L - PE to L - N
3. Connect the test leads as shown in Figure 5.2.3.3
4. As soon as the instrument senses the presence of voltage and if properly connected, the
measurement will be taken automatically
L-N Line Impedance – L-N Line Impedance –
When measuring Test leads connection
5. When measuring is completed, impedance of L - N and PSC value appears on the screen
L - N Line Impedance – Measurement completed
-73-