Datasheet

7.7. Drawing
Number
Display
Meaning
1
File Name
The file name of the Data Logger file is composed of: function,
month / date, time, file type
2
Primary display and
measurement units.
Measured value at the cursor (yellow line) with associated
listening measurement unit (in the example loop current)
3
Primary display and
measurement units.
Measured value at the cursor (yellow line) with associated
listening measurement unit (in the example loop impedance)
4
Coordinate
Displays a measurement scale for the orientation of the
progress curve
5
Function1
Displays active during the measurement functions
6
Function2
Displays active during the measurement functions
7
hours/minutes/seconds
Displays active during the measurement functions
8
L-PE Value
While the detected value measurement between phase and
ground
9
L-N Value
While the detected value measurement between phase and
neutral
10
PE-N Value
While the detected value measurement between Neutral and
ground
11
Arrows above or below
the terminal
Marks above / below the connection icon show reverse polarity
during the measurement.
12
indicator symbol
indicate reversed
polarity.
During the measurement, active limitation for the maximum
touch voltage UL or error voltage UF.
13
Check the connection
or check the wiring
The time course curve shows the development of the
measurements over the recorded period.
-96-