User Manual

5.10. Temperature measurements
Warning:
To avoid electric shock, disconnect both test probes from any source of
voltage before making a temperature measurement.
1. Insert the adapter in the input socket (+ to V/and – to COM-socket)
for temperature measurements.
2. Insert the temperature probe into the temperature adaptor, making
sure to observe the correct polarity.
3. Touch the temperature probe head to the part whose temperature
you wish to measure. Keep the probe touching the part under test
until the reading stabilize (about 30 seconds).
4. Read the temperature in the display. The digital reading will indicate
the proper decimal point and value.
Warning:
To avoid electric shock, be sure the thermocouple has been removed
before changing to any other measurement function.
-44-