User Manual

Follow these steps to perform audible continuity test:
1. Set the rotary selector (10) to / /
.
))) position.
2. Press FUNC-button until
.
))) is displayed.
3. Plug the black test lead into the meter’s COM terminal and
the red test lead into the V/ terminal.
4. Remove power from the circuit.
5. Connect the test lead tips to the object to be measured.
Note:
The buzzer will sound if the measured resistance is
approximately 30  and the middle secondary display will show
“Short” (for short).
7. How to use the meter with a PC
7.1. Connect the Meter to PC with USB cable
In this meter used special USB cable with A type USB connector
and mini-USB connector.
7.2. Installation of application software
First you must be install the USB-RS232 Driver and the
Software.
The install process is automotive.
First, insert the CD to the CD driver of PC.
-44-