User Manual

Warning!
To avoid electric shock, disconnect both leads from any
equipment before you remove or install the batteries.
Follow these steps to install the batteries.
1. Turn off the power and disconnect the two test leads.
2. Remove the 2 screws to open the battery compartment.
3. Place the batteries inside and snap it onto place.
Warning!
Do not discard the provided battery insulation capsule. If you do
not use this insulation capsule properly, it can damage the meter
or cause bodily injury.
4. Place the battery compartment cover and tighten screws.
Warning!
Do not operate the meter until you replace the battery and close
the battery compartment cover.
Caution!
Batteries, which are used up, dispose duly. Used up batteries
are hazardous and must be given in the for this being supposed
collective container.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for
example serve to operate the remote control. There also could
be batteries or accumulators built into the device itself. In
connection with the sale of these batteries or accumulators, we
are obliged under the Battery Regulations to notify our
customers of the following:
-48-