User Manual

Notes:
1. If inductance exceeds the range selected. “OL” will be
displayed on LCD, the you shall increase the range by on
step.
2. The inductance value measured for identical inductor may
be different if there is different impendence.
3. If in range 2 mH, please short test leads and measure lead
inductance and then subtract the inductance from the value
measured.
4. Avoid measuring small inductor in high range, or the
accuracy is not guaranteed.
6.6. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
1. If you wish to measure temperature set the function switch to
the °C- or °F-range
2. Insert the temperature-adaptor to the input sockets mA (+)
and V/Ω/Hz (-)
3. Touch the Temperature probe head to the part whose
temperature you wish to measure. Keep the probe touching
the part under test until the reading stabilizes (about
30 seconds).
4. Read the temperature in the display. The digital reading
will indicate the proper decimal point and value.
-45-