User Manual

5. Pre-Operation Check

To ensure correct operation and familiarize yourself with the instrument, follow these steps before

using the instrument.

1. Press POWER-Switch to ON

2. To select function, press FUNCTION-switch

3. Press RANGE-switch at your desire

4. To select an additional operation, press the special function buttons (save, Recall)

6. How to use the instrument

This section describes the instrument and how to use it. For easy reference, each description is

numbered and keyed to the illustration inside the front cover.

These buttons are used to select measuring range, operating modes. An annunciate is displayed to

indicate, that a mode or function has been selected.

1. Power

Push POWER to turn the instrument on. Press again to turn off.

2. Function

Push FUNCTION-Switches to select the mode of measurement.

DC V:

Select mode of measuring DC Voltage (0 mV … 1000 V DC).

AC V:

Select mode of measuring AC Voltage (0 mV ... 750 V AC).

Ohm:

Select mode of measuring Resistance (0 Ω ... 40 MΩ).

DC A:

Select mode of measuring DC Ampere (0 µA … 10 A DC).

AC A:

Select mode of measuring AC Ampere (0 µA ... 10 A AC).

(((

))):

Select mode of checking diodes and continuity.

-29-