User Manual

To replace a defective fuse, proceed as described:
1. Turn off multimeter with the on / off switch and disconnect test leads from the inputs.
2. Open the fuse cover and remove the defective fuse from the fuse holder.
3. Insert a new fuse of the same type and dimensions in the fuse holder.
4. Replace the fuse cover back and fix it.
5. Replace the case cover back and fix it, too.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproductions of all kinds (photocopy, microfilm or other) only by written permission of the publisher.
This manual is according the latest technical knowing. Technical changings which are in the interest
of progress, reserved.
We herewith confirm that the units are calibrated by the factory according to the specifications as per
the technical specifications.
We recommend to calibrate the unit again, after 1 year.
© PeakTech
®
03/2014/pt.
PeakTech Prüf- und Messtechnik GmbH - Kornkamp 32 - DE-22926 Ahrensburg / Germany
[phone]/44 [phone]
 [e-mail]  www.peaktech.de
PeakTech
®
4000
Bedienungsanleitung/
Operation manual
Digital-Multimeter
Top Cover
Battery Cover
Fuse Cover