Datasheet

26.9.2019 PeakTech® 4140-1 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/spektrum_analysatoren/produkt/peaktech-4140-1.html 1/2
BACK
PeakTech_4130-1_4135-1_4140-1_de_03_2017F.pdf
(1,216.5 kB)
PeakTech_4130-1_4135-1_4140-1_eng_03_2017F.pdf
(1,172.9 kB)
MANUAL
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Spectrum Analyzers PeakTech® 4140-1
PeakTech
®
4140-1 PROD-ID: P 4140-1
Digital Spectrum Analyzer 9 kHz ~ 3,0 GHz
Spectrum analyzers are used to display the amplitude distribution over a
certain frequency range.
This spectrum analyzer thus makes visible the individual spectral
components with the corresponding amplitudes, which is making this
device indispensable for the assessment and diagnosis of modern, high-
frequency electronic systems. Due to the high frequency bandwidth and
dynamic, modern spectrum analyzers are superior in many measurement
areas contrary to the use of oscilloscopes and therefore preferable for
the application.
The high technical performance and many features makes this device
ideal tools in industry, development, EMC diagnostic and quality
assurance.
Note: Same model as PeakTech 4140 - but without tracking
generator
18 cm (7 ") TFT color display with 800 x 480 pixels
Display of the amplitude distribution in the frequency range
VGA output for monitoring with external displays
Frequency range of 9 kHz to 3 GHz
Measuring function for modulated AM / FM signals
LAN port for remote control via network
USB/RS232 connector to control by software
USB host for data transfer to USB memory media
Accessories: power cable, interface cable, software CD, user manual
Frequency range 9 kHz ~ 3,0 GHz
Resolution 1 Hz (over full Bandwidth)
Resolution Bandwidth 10 Hz ~ 1 MHz (in 1-3-10 sequence) 200 Hz, 9 kHz, 120 kHz
Span Range 0 Hz, 100 Hz ~ 3,0 GHz
Phase noise -80 dBc/Hz (offset 10 kHz)
Disp. Average Noise
Level
1 MHz ~ 3 GHz < -120 dBM + 3x (f/1 GHz) dB (Pre. Amp. OFF), 1 MHz ~ 3 GHz < -135 dBM + 3x (f/1 GHz)
dB (Pre. Amp. ON)
Amp. Measurement DANL up to +30 dBm
Level Display dBm, dBmV, DBµV, V, W
Trigger Source Free, Video, External
Triggerlevel (Ext.) 5 V TTL
GENERAL :
Interface USB-Host, USB Device, LAN, RS232, VGA
Operation Voltage 100 ~ 240 V AC; 50/60 Hz
Dimensions (WxHxD) 365 x 155 x 300 mm
Weight approx. 6 kg
EAN-13 4250569403965