Datasheet

17.9.2019 PeakTech® 4145-50A - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/stromzangenadapter_4mm_oder_BNC/produkt/peaktech-4145-50a.html 1/1
BACK
4145-50A_Cable.jpg (276.7 kB)
4145-50A_Front.jpg (397.8 kB)
PICTURE
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Current Clamp Adapters 4mm / BNC PeakTech® 4145-50A
PeakTech
®
4145-50A PROD-ID: P 4145-50A
50A AC Current Clamp Adapter with BNC Plug
Professional measuring transducer that allows accurate measurements of
low currents up to 50 A AC in conjunction with a measuring device with
BNC connection. The extended shape of the measuring tongs and large
cable length allow measurements even in narrow spaces. This current
clamp adapter is ideally suited as an accessory for power meters, power
analyzers and oscilloscopes.
Also suitable as an accessory for the PeakTech 4145 power
analyzer
For conductor diameters of max. 8 mm
Cable length: approx. 280cm
Power conversion: 10mV / A
Accuracy class: IEC 60044-1 @ 0.2%
ACA 0 ... 50 A AC
ACA-Frequency 50 ... 400 Hz
Accuracy +/- 0.2%
Nominal Voltage max. 600V (isolated)
Burden Resistance < 50Ω
Linearity +/-1% @ 5% - 130% (rated current)
Phase Angle < 60 min. @ 100% (rated input)
Dielectric Withstand 2500V for 1 min.
Dielectric Resitance 100 MΩ @ 500 V DC
Dimensions (WxHxD) 52 x 174 x 35 mm
Weight ca. 400 g
EAN-13 4250569404085