User Manual

2. Introduction
The model PeakTech
®
4200 AC Current Clamp is a transducer
which will allow your multimeter to measure low electrical or/and
electric current up to 200 A AC, with a frequency response up to
400 Hz. When measuring current with this clamp, there is no
need to break a circuit or to affect the isolation.
The extended measurement jaws allow performing
measurements in a narrow space. The clamp adapter is
applicable to leakage detection or monitoring.
3. Specifications
3.1. General
Captured conductor size: 16 mm max.
Output impedance: < 1 kΩ
AC bandwidth: 40 to 400 Hz
Operating temperature: 0° C...50° C, 70 % R.H.
Storage temperature: -20° C...+60° C, 80 % R.H.
Dimensions: 111 (H) x 50 (W) x 33 (D) mm
Weight: 130 g
Output: Coil cable with straight banana
plug
-9-