User Manual

* To avoid electric shock, do not operate these products in wet or
damp conditions. Conduct measuring works only in dry clothing
and rubber shoes, i. e. on isolating mats.
* Comply with the warning labels and other info on the
equipments.
* Always start with the highest measuring range when measuring
unknown values.
* Do not subject the equipments to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipments to shocks or strong vibrations.
* Do not operate the equipments near strong magnetic fields
(motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipments.
* Allow the equipments to stabilize at room temperature before
taking up measurement (important for exact measurements).
* Do not input values over the maximum range of each
measurement to avoid damages of the meters.
* Replace the battery as soon as the battery indicator “LO BAT”
appears. With a low battery, the meters might produce false
reading that can lead to electric shock and personal injury.
* Fetch out the battery when the meters will not be used for long
period.
* Periodically wipe the cabinets with a damp cloth and mid
detergent. Do not use abrasives or solvents.
* The meters are suitable for indoor use only
* Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
* Do not store the meters in a place of explosive, inflammable
substances.
* Do not modify the equipments in any way
* Opening the equipments and service – and repair work must
only be performed by qualified service personnel
* Measuring instruments don’t belong to children hands
- 11 -