User Manual

5. If the resistance is less than 20 Ohms, the audible signal will
sound. The display will also show the actual resistance.
6. Data Transmittion Program
6.1. System Requirement
To run this application, there are some requirements for the
system as follows:
Operating system: Microsoft Windows 98SE/2000/XP/
VISTA
Memory: 128 MB RAM or more
Monitor: SuperVGA monitor (or better), with the
resolution of 800 x 600 or higher
Harddisk space: 10 MB (or more) free space
CD-ROM drive
USB port
Mouse or equivalent device
Printer (optional)
6.2. Installation
1. Place the CD supplied with the meter to the CD-ROM of the
computer.
2. Run the drivers.exe application in the CD, the Install Driver
dialog box appears. In the Install Driver dialog box, click the
“Install” button to install the USB driver.
3. Connect the USB data cable supplied with the meter to the
terminal on the top of the meter, connect the other end of
this USB data cable to the USB port of the computer. The
computer will prompt that a new hardware has been found
and the USB driver will be installed automatically.
-73-