User Manual

Max points/page box: Set the max. number ob division of
the X axis in one page. Excess
recorded data will cause this chart
changes to the next page.
Y-Axis range area: Set the scale on the Y axis. There
are two setting modes. If you
select the manual mode, the
desired upper limit and lower limit
of the scale should be typed into
the min box and the max box
respectively, the readings beyond
the limits are not visible in the
chart. If you select the automode,
the computer will automatically
adjust the scale on the Y axis to fit
all the recorded data.
Data grid area: This area is for setting for the data
in the data recording area.
Enables alarm check box: Enable or disable the colordata
alarm feature when the recorded
readings are beyond the upper or
lower limit which will be specified
later.
Value box: The two value boxes are used for
setting the lower and upper limits
respectively: the min box is for
setting the lower limit, the max box
is for setting the upper limit.
-78-