User Manual

8.8. Changing a Setup Option
* Press or to scroll to the setup option you want to change.
* Press to indicate that you want to change this setting.
* Press or until the setting you want to use appears on the
display.
* Press to store the new setting in memory. Notes Setup is
disabled in MIN MAX mode.
8.9. Offset
The primary display shows the temperature plus the offset and the
secondary display shows the offset. Remember to reset the offset to
0.0 .You can store individual offsets for T1 , T2 and T3.
8.10. Auto Power Off mode
The thermometer enters sleep mode (default). That is to say, the meter
will automatically shut off after 20 minutes if no button press occurs for
20 minutes.
When the thermometer is in Setup mode, the display shows SETUP.
Press or to scroll to the ” SLP ” page . Press to indicate
“On” or “OFF”. Press or until the setting you want to use
appears on the display. Press to store the new setting in memory.
On (sleep mode on)or 0FF (sleep mode off).
8.11. Displaying Temperatures
* Press to select the correct temperature scale.
-28-