User Manual

Safety Precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking). Pollution degree 2.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short circuits (arcing), the following
safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
∗ Use extreme caution when the laser beam is turned ON
∗ Do not let the beam enter your eye, another person’s exe or
the eye of an animal
∗ Be careful not to let the beam on a reflective surface strike
your eye
∗ Do not allow the laser light beam impinge on any gas which
can explode
∗ Do not let the beam of any body
∗ Do not subject the equipment to direct sunlight or extreme
temperatures
∗ Do not subject the equipment to extreme humidity or
dampness
∗ Do not subject the equipment to shocks or strong vibrations
∗ Do not operate the equipment near strong magnetic fields
(motors, transformer, etc.)
∗
Keep hot soldering irons or guns away from the
equipment
∗ Allow the equipment to stabilise at room temperature before
taking up measurement (important for exact measurements)
∗ Do not modify the equipment in any way
-13-