User Manual

∗ Do not place the equipment face-down on any table or work
bench to prevent damaging the controls at the front
∗ opening the equipment and service- and repair work must only
be performed by qualified service personnel
-Measuring instruments don’t belong to children hands-
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
household cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
1. Introduction
CFM/CMM Thermo-Anemometer with built-in non-contact IR
Thermometer measures remote surface temperatures to 500° C
(932° F) with 30:1 distance to spot ratio and laser pointer.
∗ Simultaneous display of air flow or air velocity plus ambient
temperature.
∗ Up to 8 easy to set dimensions (cm² or ft²) are stored in the
meter’s internal memory.
∗ 20 point average for air flow and air velocity.
∗ Super large LCD backlight display.
∗ 3% velocity accuracy via low friction 72 mm (2,83”D) ball
bearing vane wheel on 120 cm (3,9ft) cable.
∗ Data hold and max/min
∗ Can set auto power off or not.
-14-