PeakTech® 5130 Bedienungsanleitung / Operation manual Salz – Messgerät / Salt Meter
1. Sicherheitshinweise Dieses Gerät erfüllt die EU-Bestimmungen 2004/108/EG (elektromagnetische Kompatibilität). Verschmutzungsgrad 2. Zur Betriebssicherheit des Gerätes und zur Vermeidung von schweren Verletzungen durch Stromoder Spannungsüberschläge bzw. Kurzschlüsse sind nachfolgend aufgeführte Sicherheitshinweise zum Betrieb des Gerätes unbedingt zu beachten. Schäden, die durch Nichtbeachtung dieser Hinweise entstehen, sind von Ansprüchen jeglicher Art ausgeschlossen.
2.
. Bedienelemente und Anschlüsse am Gerät 333333- 1 2 3 4 5 6 Display ON – Knopf OFF – Knopf Hold-Knopf Fühler-Buchse Kalibrier-/Einstell-Knopf 3- 7 3- 8 3- 9 3-10 3-11 -3- Batteriefach Gerätefuß Fühler-Stecker Fühler-Griff Messfühler, Sensor
. Messverfahren 1. Verbinden Sie den Fühlerstecker (3-9) mit der Eingangsbuchse (3-5). 2. Schalten Sie das Gerät mit dem Einschalter (3-2) ein. 3. a) Halten Sie das Gerät am Griff für den Messfühler (3-10) fest und Fühlerkopf vollständig in die zu messende Lösung. tauchen Sie den b) Bewegen Sie den Messfühler mehrmals hin und her, so dass sich die Luftblasen vom Fühlerkopf lösen, bis sich die Anzeige nicht mehr ändert. Das Display zeigt jetzt den Salzgehalt (Gewichtprozent) an. 4.
7.1. Hinweise zum Batteriegesetz Im Lieferumfang vieler Geräte befinden sich Batterien, die. z. B. zum Betrieb von Fernbedienungen dienen. Auch in den Geräten selbst können Batterien oder Akkus fest eingebaut sein.
1. Safety Precautions This product complies with the requirements of the following European Community Directives: 2004/108/EC (Electromagnetic Compatibility). Pollution degree 2. Damages resulting from failure to observe these safety precautions are exempt from any legal claims whatever. To ensure safe operation of the equipment and eliminate the danger of serious injury due to shortcircuits (arcing), the following safety precautions must be observed.
2. Features * * * * * * * * * * * Separate electrode, easy operation The portable Salt Meter provides fast, accurate readings, with digital readability and the convenience of a remote probe separately. Measuring range: 0 to 10% salt (% weight) LCD-display for low power consumption & clear read-out even in bright ambient light condition. Automatic temp. compensation for the probe. Water resistance on the front panel. All function keys are used with rubber button. Data Hold.
4.
5. Measuring Procedure 1. Connect the "Probe Plug" (3-9) to the "Probe Input Socket" (3-5) 2. Power on the instrument by pressing the "Power ON Button" (3-2) 3. a) Hold the "Probe Handle" (3-10) by hand and let the "Probe the measured solution. Head" immerse wholly into b) Shake the probe several times to let the air bubble leave away from the Probe Head until the reading value reach stable. Display will show the salt value (% weight). 4.
7.1. Notification about the Battery Regulation The delivery of many devices includes batteries, which for example serve to operate the remote control. There also could be batteries or accumulators built into the device itself. In connection with the sale of these batteries or accumulators, we are obliged under the Battery Regulations to notify our customers of the following: Please dispose of old batteries at a council collection point or return them to a local shop at no cost.