User Manual

2.) Alarm Set the dB value and select the alarm mode:

Press the " MAX/MIN" button to turn the unit on.

Press the "MAX/MIN" button twice, then press and hold the MAX/MIN

button until the display shows a stable value.

Press the "FAST/SLOW" button to set the alarm value (40-130dB) to

increase the alarm values of 0.1dB. Continuous pressing increases

the value in 1dB steps.

Press „MAX/MIN“-key to confirm.

3) Select the alarm mode

To select the alarm mode, press the "MAX/MIN" button 2 times, then

press and hold the MAX / MIN button until the display shows a stable

value. Then press the "FAST/SLOW" button to select the alarm mode.

• "01" Alarm mode: audible and visual signal

• "02" Alarm mode: only visual signal (flashing LED)

Press the "MAX / MIN" button and leave this mode, see Fig. 8.

-19-

4. Bedienelemente und Anschlüsse am Gerät

1. Windschutz / Mikrofon

2. Ein-/Aus-Schalter

3. Fast/Slow Umschalter

4. MAX/MIN Umschalter

5. LED für Alarmfunktion

6. Messwertanzeige

7. Batteriefach (Rückseite)

8. Gewinde für Stativ (Rückseite)

-4-