User Manual

4.1. Symbols in the display

1. Indicates the unit of the displayed value.

2. Shows the actual measurement value.

3. „ “-symbol means that a part of the recorded measurements exceed the upper

limit.

4. „ “-symbol means that a part of the recorded measurements exceed the lower

limit value.

5. The display changes depending on state of charge from to . An

empty battery should be replaced immediately.

6. LOG icon is displayed when the logging mode is active and readings are

recorded.

7. It is stated the channel whose current readings are displayed.

NOTE:

The LCD does not work below -10 °C.

For more information about the software you can use the Help menu within the

software.

-24-