Datasheet

12.7.2019 PeakTech® 5201 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/holz-und-materialfeuchtemessgeraet/produkt/peaktech-5201.html 1/2
BACK
PeakTech_5201_03-2019F.pdf (444.3 kB)
MANUAL
5201_Front_freigestellt.jpg (204.6 kB)
5201_L_freigestellt.jpg (197.7 kB)
5201_R_freigestellt.jpg (205.8 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Environmental measuring instruments Wood- and Material Moisture Meter PeakTech® 5201
PeakTech
®
5201 PROD-ID: P 5201
Material Moisture Meter
This new material moisture meter allows a user-friendly, fast and non-
destructive moisture measurements on all types of building materials,
wood, and the walls and ceilings of buildings.
The absolute humidity, as well as the minimum and maximum measured
moisture are here shown in the large, illuminated digital display. To
measure also at difficult to reach positions, this device allows to hold
the current measured value in the display by pressing the hold button.
Besides the measured values, the device shows a settable message "Dry,
Wet or Risk" and also makes an audible warning tone for high humidity
values.
To perform a fast and accurate measurement, this meter uses the
electrical resistance of the material and also performs a self-calibration
after switching on the device.
The variety of functions and the user-friendly handling of this device
makes it suitable for all building owners, architects, craftsmen and
hobbyists.
Replaceable test-probes
Moisture measurement of all building materials such as Plaster,
Gypsum and masonry, same as wood
Damage-free measurement with a metal sensor
Material measurement depth of 20 to 40 mm
Self-calibration when the device starts
LCD display with backlight illumination
Shock and impact resistant housing
Easy to use and fast measurement rate
Data-Hold and Auto-Power-Off
Display (Dry, Risk, Wet) for good-bad reading
Accessories: Batteries, carrying case and user manual