User Manual

3.1. Controls and description
1.) Power switch: press then the power is ON/OFF
2.) Smoothing witch: press then the power supply output the smoothed DC
3.) Output terminal (+): connecting the terminal of DC positive load
4.) Output terminal (-): connecting the terminal of DC negative load
5.) CASE ground: connecting the case to ground
6.) Output terminal: connecting the terminal of AC load
7.) Output terminal: connecting the terminal of AC load
8.) thermal overload protection of the outputs
9.) AC or DC switch: Switching the AC or DC display
10.) Amp display: indicating output current by LED(both DC and AC
11.) Volt display: indicating output voltage by LED (both DC and AC)
12.) Voltage adjustment: adjusting the output voltage (both DC and AC)
-7-
1.
2.
3.
4.
5. 6.
7.
8.
9.
10. 11.
12.