User Manual

4. Installation
1. This power supply is designed for indoor use only , put the unit
in a well ventilated place and allow at least 50mm(2 in.) space
on two sides and the back to allow sufficient fan
2. Check for the correct input AC voltage with the rating label on
the power supply cooling.
Make sure your mains plug is of 3 pin version and the ground
pin is effective as the grounding of the power supply will prevent
electrical shock caused by leakage.
3. Turn on the power supply for a few minutes and the indicator (2)
should be in green.
4. Turn off the power supply and connect the equipment with
correct polarity.
5. Turn on the power supply first and then turn on the equipment.
6. When the operation is finished, turn off the equipment first and
then turn off the power supply.
-14-