User Manual

Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
household cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
2. Introduction
The sound level calibrator PeakTech
®
8010 meets the requirements
of EN 60942: 2003 Class 2, which is used to check the accuracy of
sound level meters.
A defined sound level signal with a sound level of 94 dB (decibels)
or 114 dB at a sound frequency of 1000Hz can be generated.
It can insert sound level meters, which are equipped with a
microphone with a diameter of ½ "(12.7mm) into the calibration port
of the calibrator.
The specified accuracies are given at an atmospheric pressure of
1013 hPa, an ambient temperature of 23 °C and a humidity of
65% RH.
-9-