Datasheet
19.9.2019 PeakTech® 8101 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/messgeraete-sets/produkt/peaktech-8101.html 1/1
BACK
8101_Front.jpg (474.6 kB)
PICTURE
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: 0049 4102 42343/44
Fax: 0049 4102 43416
Products Measurement Device Sets PeakTech® 8101
PeakTech
®
8101 PROD-ID: P 8101
Measurement Equipment Set "Electro"
Designed for daily use in electronics, this case system contains
everything needed for installation and maintenance of all electrical
equipment.
DC and AC voltages, currents up to 80 A or 5A can be ideally
measuredwith the PeakTech 4350 Clamp multimeter in highly accurate
resolutionof 1 mA, also capacitors, resistors and even temperatures.
For quick voltage tests before working on an electrical installation,
the PeakTech 1030 provides an easy way of measurement through a
noncontact sensor to check if the measured system is live or voltage-
free.
The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display
of voltages between 12 V and 690 V and can also be used as a
continuity tester. Furthermore, the rotational direction indicator helps
in installationand maintenance of three-phase systems.
These high-quality measurement devices can be safely transported
to your working site with the PeakTech 7305 carrying case and
protected from dust and rain, as well as from hard knocks and impact
damage.
PeakTech 1030 Non Contact Voltage finder ; 90 V AC ~ 1000 V AC
PeakTech 4350 Current Clamp with Multimeter ; 600 V AC/DC ; 80 A AC/DC
PeakTech 1095 Two-Pole Voltage Tester ; 12/24/36/50/120/230/40/690 V AC/DC
PeakTech 7305 Carrying Case for measurement devices ; 405 x 330 x 155mm
EAN-13 4250569403507