Datasheet

6.3. LNB configuration
To make the LNB settings for the satellite search, select the top menu item in the main menu. The
following menu is displayed:
1. LNB: You can set 16 different LNBs with different setups. Select the desired LNB with the
◄Left/ Right► arrow keys.
2. L.O. Frequency: Select the correct LNB frequency with the ◄Left/ Right► arrow keys.
3. LNB Power: Select the correct LNB voltage with the ◄Left/ Right► arrow keys.
4. LNB Type: Select the correct LNB type (Universal, Unicable…) with the ◄Left/ Right►
arrow keys.
5. DiSEqC: If your system features DiSEqC, select this from the following options: OFF, 1.0,
1.1
6. DiSEqC Input: Select DiSEqC at the correct input with the ◄Left/ Right► arrow keys (1 ~
4).
7. DISEqC Repeat: Number of repetitions of the DiSEqC commands (0 ~ 3)
8. 22 KHz switch: Select the 22kHz switching with the ◄Left/ Right► arrow keys.
-49-