Datasheet

5. Network Search: When enabled, network search can receive enhanced information from
the transponder to (e.g.) find new stations if available, which have not been deposited in the
unit's internal data. Press the ◄Left / Right► buttons to switch the option.
6. TP Scan: Start searching channels only on the selected transponder with the OK button.
With the ◄Left / Right► button you can select before whether "all" stations incl. Pay-TV can
be searched or "FTA Only", with encrypted programs are not listed. The channels found are
listed in a table:
7. Sat Scan: Start searching channels on all transponders of the selected satellite. The
channels found are listed in a table, as shown in the "TP Scan".
8. Blind Scan: By pressing the blue "Find" button in the satellite search menu you can also
start a blind search, in which all possibilities are driven by the search for an unknown
satellite transponder. The channels found are listed in a table, as shown in the "TP Scan".
9. Information: As part of the signal search (TP search, satellite scan or blind scan), you can
see the bar graph of signal level and signal quality, at the same time the LOCK lamp lights
up with an acoustic signal, which pulsates faster, the higher the signal strength is. DiSEqC
indicates which port is connected to the DiSEqC 1.0 switch. Press the F1 key, the
information shown enlarged:
-52-