Datasheet

4. Network Search: Any available additional information is retrieved from the transponder
when enabled.
5. TP Scan: Start searching channels only on the selected transponder with the OK button.
With the ◄Left / Right► key, you can select in advance whether "all" stations incl. Pay-TV
can be searched or "FTA Only", with encrypted programs not listed. The channels found are
listed in a table:
6. Auto Scan: Starts the channel search over the entire DVB-T frequency spectrum with the
OK button. With the ◄Left / Right► button, you can select before whether "all" stations incl.
Pay-TV will be searched or "FTA Only", with encrypted programs not listed. The channels
found are listed in a table, as it’s done in the TP search in the previous section.
7. After completing the channel search, you can save the found stations and change to the
LIVE TV view.
6.7. DVB-C Setup
Select DVB-C Setup from the main menu with the arrow keys. The DVB-C signal search can find
channels that are transmitted over a cable network. For this purpose, a connection of the RF socket
on PeakTech
®
9020 with an antenna socket with connection to the cable operator is necessary. There
are no DVB-C signals via a terrestrial antenna or satellite dish. The following menu for the DVB-C
signal search will appear:
-55-