Operation Manual
ENGLISH
58
Audio and video momentarily pause dur-
ing reading of the disc.
The disc is dirty or any scratch.
Check the TV system setting, switch PAL/NT-
SC TV system in setup menu.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
The unit is on with start logo and menu but
has no image from the disc.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON,
wait for 5 seconds, and then press this button
again.
The unit freezes during reading of CD-R/
DVD-R disc.
Reset the unit. When you see Loading on the
screen, press OPEN/CLOSE to take out the
disc, clean the disc and try it again.
If the unit freezes again, the disc may have
some contents the unit can't support, please
stop playing the disc in this unit.
TV SCREEN AND VIDEO
The images from this unit do not appear
on the television. Picture is distorted.
Make sure that the television is connected to
the VIDEO OUT terminal or HDMI AV OUT ter-
minal on this unit.
Make sure that the television input setting (e.g.,
VIDEO 1) is correct.
The device is likely to enter screen saver sta-
tus.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
Video is not output in high definition. High definition video cannot be output through
the VIDEO OUT.
Confirm that the HDMI Resolution in the Setup
menu is set properly.
The 4:3 aspect ratio picture expands left
and right.
Screen size is wrong.
Use the television to change the aspect. Refer
to the television operating instructions.
When using a component video cable, set TV
Aspect to 4:3 Pan and Scan.
There is no apparent change in picture
quality when adjusted with the Video me-
nu in the on-screen menu.
The eect is less perceivable with some types
of video.
When it is playing BD-LIVE disc, Video
output is a black screen.
Select ‚Erase Blue-ray storage‘ in the menu.
Close menu and restart.
Please check the internet is ok or not. Some
discs need the support of internet.
Please check the plug of the connecting cable;
if loose, insert it again.