Operation Manual

ENGLISH
44
DE-/ACTIVATE REMOTE ACCESS
Remote
Access
1. Press / OK.
2.
Scroll with  and  to ‘Answer
machine’ and press / OK to confirm.
3. Scroll with  and  to ‘Remote Access’
and press / OK to confirm.
4. Select ‘Enable’ or ‘Disable’ and press
/ OK to confirm.
5.
If you select ‘Enable’ then you have to
enter the old PIN (default 0000) and a
new PIN. Press / OK to confirm.
OPERATE REMOTE ACCESS
1.
Make a call to your home number with a
touch tone phone.
2.
Enter * when you hear the announcement.
3. Enter your PIN code.
•
You now have access to your
answering machine, and you can
now listen to the new messages.
4. Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Key Function
1 Activate remote access
2 Play/Stop message
4
Repeat actual message or playback
previous message
5 Delete actual message
6 Skip to next message
7 Activate the answering machine (not
available during playback message)
9 Deactivate the answering machine
(not available during message
playback)
* Enter PIN
Cleaning and care
• Unplug the adaptor from the socket
before cleaning the unit.
•
Attention! Do not let water penetrate
into the unit.
•
Clean the housing with a lightly
dampened cloth.
•
Do not use sharp, scouring or aggressive
cleaners.
• Do not use chemicals (such as gasoline
or alcohol) to clean the housing.
PDP130_IM_08.indb 44 11/9/12 11:17 AM