Operation Manual

47
ENGLISH
AUX Mode
AUDIO SETTING
Selecting Mono or Stereo mode.
1. Press MENU.
2. Select the Audio Setting
USB Playback
1. Insert an USB Stick with MP3/WMA/
AAC music files.
2. Press MODE and select Music player.
3. Select USB playback.
4. Playback starts automatically and the
first track will be played. If there is no
USB device connected, the message
NO USB device found will be displayed
on the screen.
Note
Connect the USB device directly to the
USB port of the unit. Using an extension
cable is not recommended and may cause
interference and failure of data transfer.
This product supports USB 1.1 and 2.0 up
to 32GB with file system FAT16 and FAT32.
1. Connect the audio cable (not included)
into the AUX IN jack (3.5 mm) at the rear
side of the device.
2. Press MODE to select AUX as a source.
3. Start playing from the device.
Attention
Check the safety and user instruction of the
external device before connection.
IM_PDR210-B/W_140618_V02_HR_1.indb 47 23/6/14 10:58 AM