Operation Manual

61
ENGLISH
AUDIO SETTING
Selecting Mono or Stereo mode.
1. Press PRESET to select “Audio
setting” and confirm by pressing
ENTER. Following options are available:
2. Press PRESET to select and
confirm by pressing ENTER.
Alternative the audio setting can be set
with by pressing MONO/ST. on the remote
control.
STORE FM STATIONS
You can store up to 10 preset FM stations.
1. Select the desired FM station.
2. Press and hold MEMORY until “Save to
Preset” appears on the display.
3. Select a preset number from 1 – 10 and
confirm by pressing ENTER.
4. The preset number of the stored station
is displayed.
5. Repeat steps 1 to 4 to store more FM
stations.
SELECTING PRESET FM STATIONS
1. Press MEMORY to access the preset
menu.
2. Press PRESET
to select a preset
number and confirm by pressing ENTER.
1. Connect the audio cable (not included)
into the AUDIO IN jack (3.5 mm) at the
rear side of the device.
2. Press MODE to select AUX IN as a
source.
3. Start playing from the device.
Attention:
Check the safety and user instruction of the
external device before connection.
CD-Mode
CD
Press MODE to select CD as a source.
AUDIO IN
IM_PDR350BT_1_150930_V04_HR.indb 61 30/9/15 4:38 PM