Operation Manual

ENGLISH
38
1. Connect the USB cable
(included) to the speaker.
2. Connect the other end of
the USB cable to the USB
port of the computer or a
USB-charger.
3. During the battery charg-
ing the LED lights continu-
ously red.
Note
LED turns on continuously:
Battery charging.
LED twinkles: Battery must
be re-charged.
LED turns o: Battery charg-
ing complete.
The speaker can still be
used during charging. It will
take approx. 2 hours to fully
charge the battery.
Pairing
1. Press On/O button until
the LED turns on blue. The
speaker is ready for pair-
ing, when the LED twin-
kles in red-and-blue and a
sound is chimed.
Charging the
battery
IM_PPA10BT_150508_V05_HR.indb 38 8/5/15 3:13 PM