Operation Manual

English 30

Setting up Bluetooth connection

1. On/o button in ON position. A signal sounds. Blue

LED ﬂashes rapidly. Speaker ready for connection.

2. Activate Bluetooth on audio source (e.g. mobile

phone). Browse for devices and select “PPA20BT”.

Establish connection. If necessary, enter password

0000

3. If necessary, select “PPA20BT” as audio output

device. LED lights up blue: connection established,

playback paused. LED ﬂashes blue slowly:

connection established, playback continued.

Wired connection

1. Connect Micro-USB plug to LINE/DC socket.

2. Connect jack plug to audio source’s headphone

socket.

3. On/o button in ON position. A signal sounds. LED

stays red.

4. Start audio source playback.

PPA20BT_62x62mm_131022 (1.8) (01 - DE EL EN ES).indb 30 22/10/13 10:14 AM