User manual

ManualsBrandsPearl ManualsBass Drum PedalsDouble Bass Drum Pedal

Congratulations on your purchase!

To get optimum performance from your P-932 / P-932L / P-931 Drum Pedal,

please read this Instruction Manual before playing.

P-932/P-932L/931

PEARL DRUM PEDAL

Instruction Manual

Spring Assembly

Key Bolt

(for Beater Setting)

Hoop Clamp

Wing Bolt

Footboard

DuoBeat Beater (2-Surface Beater)

Drive Shaft Assembly

Drive Shaft Drive Shaft

Key Bolts

(for Drive Shaft Attachment)

Chain

Beater Holder Link

Key Bolt

(for Beater Angle

Adjustment)

Interchangeable Cam

Beater Angle Cam

Spring

Upper Nut

Lower Nut

Click Lock

Key Bolts

(for Adjusting Pedal Spacing)

Center Connecting Tube

Summary of content (5 pages)

PAGE 1
PEARL DRUM PEDAL P-932/P-932L /931 Instruction Manual Congratulations on your purchase! To get optimum performance from your P-932 / P-932L / P-931 Drum Pedal, please read this Instruction Manual before playing.
PAGE 2
DuoBeat Beater (2-Surface Beater) The DuoBeat Beater features a Felt Surface (A) for a full, warm sound and a Plastic Surface (B) for a sharper, punchier sound. Use the side that best suits your playing style (Fig.1). B A Surface Material Plastic Surface Sound Sharper, Punchier Sound Surface Material Felt Surface Sound Full, Warm Sound Connecting the Drive Shaft Assembly Connect the ends of the Drive Shaft (A) to the short extensions (B) on the Main and Slave Side Pedals.
PAGE 3
Spring Tension Adjustment PowerShifter The P-932 Drum Pedal features Pearl’s patented Click Lock spring tension retention system. To increase the spring tension, disable the Click Lock by lifting the lever upward, loosen the Upper Nut and press downwards. Keep the position of the Upper Nut and tighten the Lower Nut until the desired tension is achieved (Fig.7).
PAGE 4
Interchangeable Cam System The P-932 Drum Pedal is equipped with Pearl's Patented Interchangeable Cam system which allows you to change the feel and action of the pedal. It comes from the factory with the Orange Cam installed, which is an "Off-Centered" cam design with light feel in the beginning that accelerates with power and speed at impact. Removing the Orange Cam reveals Pearl's "Perfect Circle" Cam that's renown for its power and natural, balanced action.
PAGE 5
Converting Your P-930 Single Pedal to the Slave Pedal Loosen the Key Bolt on the Beater Holder Link with the provided Drum Key and remove the DuoBeat Beater and the Key Bolt. Disengage the Click-Lock (A) and remove the Lower Nut from the Bolt (B). Take the Hook off from the Cam Roller (C) and remove the Spring Assembly from the Post (D). Gently spread the Click-Lock apart and remove it from the Post (E). Please refer to (Figs.4-6) to attach the Drive Shaft.