User manual

*******************************************
*******************************************
The P-931 includes the following components:
・ Main Pedal
・ DuoBeat Beater
・ Drive Shaft Assembly
The P-931 Add-on Pedal Converts
Your P-930 Single Pedal into a
Double Pedal.
Main Pedal
DuoBeat Beater
Drive Shaft Assembly
Fig. 11-A Fig. 11-B
Interchangeable Cam System
The P-932 Drum Pedal is equipped with Pearl's Patented
Interchangeable Cam system which allows you to change
the feel and action of the pedal. It comes from the factory
with the Orange Cam installed, which is an "Off-Centered"
cam design with light feel in the beginning that acceler-
ates with power and speed at impact. Removing the
Orange Cam reveals Pearl's "Perfect Circle" Cam that's
renown for its power and natural, balanced action.
To remove the Orange Cam, insert the provided Hex
Wrench (2.5mm) into the center of the Orange Cam
between the gap of the Chain and loosen the Screw
(Fig.11-A). Pull the Orange Cam straight up and away
from the Chain (Fig.11-B). Reverse the steps to reattach
the Orange Cam.
Orange Cam
Chain
Hexagonal Wrench (2.5mm)
Screw
TIP
The Orange Cam can be attached with either end up.
TIP
The P-931 includes only one DuoBeat Beater.