User manual

(D)
http://www.pearldrum.com
Products and specifications are subject to change without notice.
Printed in China
-1212-
NOTE
Periodically apply lube to parts such as the Chain, Bolts and
Nuts, Footboard Hinge and Bearings.
Converting Your P-930 Single Pedal to the
Slave Pedal
Loosen the Key Bolt on the Beater Holder Link with the
provided Drum Key and remove the DuoBeat Beater and
the Key Bolt. Disengage the Click-Lock (A) and remove
the Lower Nut from the Bolt (B). Take the Hook off from
the Cam Roller (C) and remove the Spring Assembly from
the Post (D). Gently spread the Click-Lock apart and
remove it from the Post (E).
Please refer to (Figs.4-6) to attach the Drive Shaft.
Cam Rollert (C)
Hook
Lower Nut (B)
Click-Lock (A)
Key Bolt
Spring Assembly
Beater Holder Link
DuoBeat Beater
Click-Lock
(E)
TIP
Please retain the parts that were removed from the P-930
(Key Bolt, Click-Lock, Spring Assembly) should you decide to
restore it to a Single Pedal.
Optional Items (sold separately)
・Pedal Stabilizer (PS-85)
Bolt