User manual

ManualsBrandsPearl ManualsDrum HardwareSnare Drum Stand

Congratulations on your purchase!

To get optimum performance from your S-1030L / S -1030LS Concert Snare Stand,

please read this Instruction Manual before playing.

S-1030L/S-1030LS

PEARL CONCERT SNARE STAND

Instruction Manual

Rubber Tip

Gyro-Lock Tilter

Adjustment Nut

Wing Nut

Wing Bolt

Wing Nut

Base

Section

Basket

Section

S-1030LSS-1030L

Telescoping Arms

Die-Cast Joint

Summary of content (4 pages)

PAGE 1
PEARL CONCERT SNARE STAND S-1030L / S-1030LS Instruction Manual Congratulations on your purchase! To get optimum performance from your S-1030L / S -1030LS Concert Snare Stand, please read this Instruction Manual before playing.
PAGE 2
Base Section Assembly Loosen the Wing Bolt on the Base Section and extend the legs to form a stable tripod (a minimum of 24" (60cm) is recommended for optimum stability). Tighten the Wing Bolt securely when set (Fig.1). Loosen the Wing Nut on the Die Cast Joint on the Base Section and insert the Upper Tube of the Basket Section as shown. Adjust the height to your preference and tighten the Wing Nut on the Die-Cast Joint securely (Fig.3).
PAGE 3
Telescoping Arms Gyro-Lock Tilter The S-1030/S-1030LS features telescoping arms that accommodate drums from 10" to 16" in diameter. Loosen the Key Bolts and align the ends of the arms to the Index Marks that correspond to the diameter of your drum. Tighten the Key Bolts when the settings are completed (Fig.5). The Gyro-Lock Tilter featured on the S-1030/S-1030LS is infinitely adjustable and allows the drum to be tilted fore/aft and left/right at the same time for precise placement (Fig.7).
PAGE 4
Optional Items (sold separately) CAUTION ・Convertible Spike / Rubber Tip (CVT-300/3) The optional CVT-300/3 Convertible Spike/Rubber Tips replace the stock Rubber Tips and give you the choice of Rubber Tips or Spike Tips for greater stability. Push Button "A" to activate the Spike Tip (Fig.8). To retract, push Button "B" (Fig.