User's Manual

AF Input Connections
(1) 2-Wire Electret condenser
microphone Capsule
(2) 3-Wire Electret condenser microphone Capsule
(3) Dynamic Microphone
(4) Electric Guitar
(5) Line-in (Impedance 8KΩ ATT. 10dB
Battery Removal and Installation
1. Pushing down both snap locks on the sides to open battery compartment cover. Take out the one battery.
(Figure 3)
2. Insert one charged 18500 rechargeable battery into the battery compartment according to the
correct polarity (- and +) as shown in (Figure 4) . en close the battery compartment cover tightly.
(Figure 3) (Figure 4)
Caution
Remove the batteries if unused for a long period of time to prevent battery leakage, corrosion and causes possible
damage to electronics.
Caution
Note: Transmitter cannot be powered on with charged battery.
Method 1:
a. Ensure battery is inserted correctly with + top side.
b. If battery is inserted correctly it could be due to self battery protection mechanism. Insert the transmitter