User's Manual

into the charger to re-charge for 10-20 seconds to wake-up the battery. It should work.

c. If charger cannot be used, reverse the battery insertion for 10-20 seconds, wake up the battery with

correct polarity. It should work.

Method 2:

a. Power o the transmitter before open the hinged cover. Press battery protection circuitry reset button

once to wake-up battery. Power on the transmitter.

Battery Protection Circuitry Reset Button

PRO COMM Battery Charger (Optional)

MP-80 Charger charges both transmitters and 18500 rechargeable batteries.

Transmitters Charging

18500 Charging

PRO COMM Dual-Slot Battery Charger

Use the Battery Charger to charge up to two rechargeable 18500 Li-ion batteries for rechargeable Peavey®

handheld or bodypack transmitter.

Charging Batteries: Insert the batteries with the correct positive (+) & negative (-) polarity and plug the

charger into a power outlet, as shown here.

Charge Status: e indicator light displays the charging status of the batteries.

Still Red: e batteries are charging.

Still Green: e batteries are charged and ready to use.

Flashing Light: May indicate any of the following conditions:

a. e batteries haven’t been properly installed in the charger.

b. An unsupported type of battery is in the charger.