MAX® Series 158/110/112/115 Bass Amplifier Owner's Manual For more information on other great Peavey products, visit your local Peavey dealer or go online to www.peavey.
Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Risk of electrical shock — DO NOT OPEN! CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical products, basic cautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
WICHTIGE SICHERHEITSHINWEISE ACHTUNG: Beim Einsatz von Elektrogeräten müssen u.a. grundlegende Vorsichtsmaßnahmen befolgt werden: 1. Lesen Sie sich diese Anweisungen durch. 2. Bewahren Sie diese Anweisungen auf. 3. Beachten Sie alle Warnungen. 4. Befolgen Sie alle Anweisungen. 5. Setzen Sie dieses Gerät nicht in der Nähe von Wasser ein. 6. Reinigen Sie es nur mit einem trockenen Tuch. 7. Blockieren Sie keine der Lüftungsöffnungen. Führen Sie die Installation gemäß den Anweisungen des Herstellers durch. 8.
INSTRUCTIONS IMPORTANTES DE SECURITE ATTENTION: L’utilisation de tout appareil électrique doit être soumise aux precautions d’usage incluant: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Lire ces instructions. Gardez ce manuel pour de futures références. Prétez attention aux messages de précautions de ce manuel. Suivez ces instructions. N’utilisez pas cette unité proche de plans d’eau. N’utilisez qu’un tissu sec pour le nettoyage de votre unité.
INSTRUCCIONES IMPORTANTES PARA SU SEGURIDAD CUIDADO: Cuando use productos electrónicos, debe tomar precauciones básicas, incluyendo las siguientes: 1. Lea estas instrucciones. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Guarde estas instrucciones. Haga caso de todos los consejos. Siga todas las instrucciones. No usar este aparato cerca del agua. Limpiar solamente con una tela seca. No bloquear ninguna de las salidas de ventilación.
ENGLISH MAX® 158/110/112/115 Bass Amplifiers Thank you for selecting a Peavey MAX Series bass guitar amplifier. The MAX Series offers great sound in a small, convenient and easy-to-use package. Its design makes it perfect as a practice amplifier or for small jam sessions. The built-in Tape/CD jack allows you to jam along with your favorite tunes while the headphone input offers the convenience of practicing privately anytime, day or night.
Front Panel shift 1 2 3 4 (1) Input Jack Plug your bass into this 1/4" jack. Connect your bass prior to turning on the power switch. (2) Gain This control sets the MAX® preamp input gain and works in conjuction with the selected Voicing preset (see 3, Voicing). Rotating the control clockwise increases gain, but your final setting will depend on the output of your bass (passive or active) as well as your playing style.
Front Panel 5 6 7 (5) RCA CD/Line In jacks (MAX® 158 and 110 only) These RCA input jacks allows you to connect a stereo, tape or CD player to your MAX Series bass amp and play along. (6) Post-EQ EFX Loop (MAX 112 and 115 only) This section allows you to add an effect or connect a CD player post-EQ or after settings have been applied to the EQ section (see 4). Send/CD Input This standard 1/4" input jack allows you to connect a tape or CD player to your MAX Series bass amp and play along.
Front Panel 9 8 (8) Master Volume (MAX 115 only) This control sets the overall volume for a preset. As with the Gain knob, rotating this control clockwise increases gain or overall output. (9) Power Switch This two-way rocker switch applies power to the unit when placed in the ON position. A red LED on the Power switch illuminates when power is supplied. WARNING: The power switch breaks only one side of the mains.
MAX® Series Specifications MAX 158 Rated Power: 15 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line Power Consumption: (Domestic) 50 watts, 60 Hz, 120 VAC (Export) 50 watts, 50/60 Hz, 230 VAC The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing: Input Sensitivity: Nominal Input Level (Modern): -12.4 dBV‚ 240 mV RMS Maximum Input Level: 6.0 dBV‚ 2.0 V RMS Tape/CD Input: Impedance: High-Z, 1Meg ohms Nominal Input Level: 5.60 dBV‚ 1.
MAX® Series Specifications MAX 112 Rated Power: 40 watts RMS into 8 ohms, nominal @ 1 kHz, 120 VAC line Power Consumption: (Domestic) 75 watts, 60 Hz, 120 VAC (Export) 75 watts, 50/60 Hz, 230 VAC The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing: Input Sensitivity: Nominal Input Level (Modern): -15.4 dBV‚ 170 mV RMS Maximum Input Level: 7.04 dBV‚ 2.25 V RMS Tape/CD Input: (Stereo cable must be used) Impedance: High-Z, 33k ohms Nominal Input Level: 8.46 dBV‚ 2.
DEUTSCH MAX® 158/110/112/115 Bassverstärker Wir möchten uns dafür bedanken, dass Sie sich für einen Bassverstärker der Peavey MAX Series entschieden haben. Die MAX Series bietet großartigen Klang in einem kleinen, kompakten und leicht bedienbaren Gerät. Aufgrund seiner Konstruktion eignet er sich ideal als Übungsverstärker oder für kleine Jam-Sessions.
VORDERSEITE shift 1 2 3 4 (1) Eingangsklinke Stecken Sie das Kabel Ihres Basses in diese 6,3-mm-Klinke ein. Der Bass muss angeschlossen werden, bevor Sie den Netzschalter einschalten. (2) Gain Mit diesem Regler wird die Eingangsverstärkung des MAX®-Vorverstärkers eingestellt. Er arbeitet zusammen mit dem ausgewählten Voicing-Preset (siehe 3, Voicing).
Vorderseite 5 6 7 (5) Cinch-CD/Line-In-Klinken (nur MAX® 158 und 110) Über diese Cinch-Eingangsbuchsen können Sie eine Stereoanlage, ein Tonbandgerät oder einen CDPlayer an Ihren Bassverstärker der MAX Series anschließen und zur Musik mitspielen. (6) Post-EQ-Effektschleife (nur MAX 112 und 115) Über diese Stufe können Sie ein Effektgerät einschleifen oder einen CD-Player hinter dem EQ bzw. nach Abschluss der Einstellungen an die EQ-Stufe anschließen (siehe 4).
Vorderseite 9 8 (8) Master Volume (nur MAX 115) Mit diesem Regler wird die Gesamtlautstärke eines Presets festgelegt. Wie beim Gain-Regler wird durch Drehen dieses Reglers im Uhrzeigersinn der Gain oder die Gesamtleistung verstärkt. (9) Power-Schalter Steht dieser Kippschalter mit zwei Positionen auf der Position ON, wird das Gerät mit Netzstrom versorgt. Eine rote LED am Netzschalter leuchtet, wenn das Gerät mit Strom versorgt wird.
MAX® Series TECHNISCHE DATEN MAX 158 Nennleistung: 15 Watt RMS an 4 Ohm, Nennleistung bei 1 kHz, 120 V Wechselstromleitung Leistungsaufnahme: (USA) 50 Watt, 60 Hz, 120 V Wechselstrom (Export) 50 Watt, 50/60 Hz, 220-240 V Wechselstrom Die folgenden technischen Daten wurden bei 1 kHz mit allen Reglervoreinstellungen auf 5 und Voicing-Einstellung „Modern“ gemessen: Eingangsempfindlichkeit: Nenneingangspegel (Modern): -12,4 dBV‚ 240 mV RMS Max.
MAX® Series TECHNISCHE DATEN MAX 112 Nennleistung: 40 Watt RMS an 8 Ohm, Nennleistung bei 1 kHz, 120 V Wechselstromleitung Leistungsaufnahme: (USA) 75 Watt, 60 Hz, 120 V Wechselstrom (Export) 75 Watt, 50/60 Hz, 220-240 V Wechselstrom Die folgenden technischen Daten wurden bei 1 kHz mit allen Reglervoreinstellungen auf 5 und Voicing-Einstellung „Modern“ gemessen: Eingangsempfindlichkeit: Nenneingangspegel (Modern): -15,4 dBV‚ 170 mV RMS Max.
FRANÇAIS MAX® 158/110/112/115 Amplificateurs pour basse Merci d’avoir choisi un amplificateur pour basses Peavey. Cette gamme d’amplificateurs offre une haute qualité sonore le tout dans une unité compacte et pratique qui pourra être utilisée facilement. Sa conception en fait un outil parfait pour les débutants les improvisations ou répétitions.
PANEAU AVANT shift 1 2 3 4 (1) Jack d’entrée Branchez votre basse dans cette prise de 1/4". Connectez votre basse avant de mettre l’amplificateur sous tension. (2) Gain Ce contrôle permet le réglage du gain d’entrée du préamplificateur et il fonctionne en conjonction avec le préréglage de voie sélectioné (Voir 3, Tonalités).
PANEAU AVANT 5 6 7 (5) RCA CD/Jacks en ligne (MAX® 158 et 110 uniquement) Ces entrées RCA vous permettent de connecter une source stéréo à travers votre amplificateur pour jouer par dessus (cassette, CD ou autre). (6) Boucle Post-EQ EFX (MAX 112 et 115 seulement) Cette section vous permet de connecter un effet ou d’ajouter par exemple un lecteur de CD post-EQ ou après vos réglages sur la section d’égalisation (Voir 4).
PANEAU AVANT 9 8 (8) Volume Master (MAX 115 seulement) Ce contrôle ajuste le volume du préréglage. Tourner horairement ce contrôle augmentera le niveau de sortie général. (9) Intérrupteur d’alimentation Ce sélecteur de deux points permet d’alimenter l’unité lorsqu’il est positionné sur ON. Une LED rouge s’illumine pour indiquer que l’amplificateur est sous tension. AVERTISSEMENT: L’intérrupteur ne coupe qu’une seule borne du courant principal.
MAX® Series Specifications MAX 158 Puissance mesurée: 15 watts RMS sous 4 ohms, nominale @ 1 kHz, 120 VAC ligne Consommation électrique: (Domestique) 50 watts, 60 Hz, 120 VAC (Export) 50 watts, 50/60 Hz, 230 VAC Les spécifications suivantes sont mesurées à 1khz avec tous les réglages de preset à 5 tonalité “Modern” Sensibilité d’entrée: Niveau d’entrée nominal (Modern): -12.4 dBV‚ 240 mV RMS Niveau d’entrée maximum: 6.0 dBV‚ 2.
MAX® Series Specifications MAX 112 Puissance mesurée: 40 watts RMS sous 8 ohms, nominale @ 1 kHz, 120 VAC line Consommation électrique: (Domestique) 75 watts, 60 Hz, 120 VAC (Export) 75 watts, 50/60 Hz, 230 VAC Les spécifications suivantes sont mesurées à 1khz avec tous les réglages de preset à 5 tonalité “Modern” Sensibilité d’entrée: Niveau d’entrée nominal (Modern): -15.4 dBV‚ 170mV RMS Niveau d’entrée maximum: 7.04 dBV‚ 2.
ESPAÑOL MAX® 158/110/112/115 Amplificadores para Bajo Gracias por elegir un amplificador Peavey para bajo de la Serie MAX. La Serie MAX ofrece un gran sonido en un paquete fácil de usar, conveniente y pequeño. Su diseño lo hace perfecto como un amplificador para practicar o para pequeñas jam sessions. El jack Tape/CD que incluye le permite tocar sobre sus canciones favoritas mientras que la salida de auriculares le ofrece la posibilidad de practicar en privado en cualquier momento, de día o de noche.
PANEL FRONTAL shift 1 2 3 4 (1) Jack de entrada Conecte su bajo a este jack de 1/4". Conecte su bajo antes de encender el amplificador. (2) Ganancia Este control sitúa la ganancia de entrada del previo del MAX® y funciona conjuntamente con el preset de Voicing seleccionado (vea 3, Voicing). Girando el control hacia la derecha incrementará la ganancia, pero su nivel final dependerá tanto de la salida de su bajo (pasivo o activo) como de su estilo de interpretación.
PANEL FRONTAL 5 6 7 (5) Jacks RCA de entrada CD/Line (sólo en MAX® 158 y 110) Estas entradas de jack RCA le permiten conectar un lector CD o pletina estéreo, a su ampli para bajo de la Serie MAX y tocar sobre la música. (6) Loop de EFX Post-EQ (sólo en MAX 112 y 115) Esta sección le permite añadir un efecto o conectar un lector de CD post-EQ o después de que se haya aplicado la ecualización seleccionada (ver 4).
PANEL FRONTAL 9 8 (8) Volumen General (sólo en MAX 115) Este control selecciona el volumen general para un preset. Como el control de ganancia, girando este control hacia la derecha incrementa la ganancia o salida general. (9) Interruptor de encendido Este conmutador de dos posiciones proporciona alimentación a la unidad cuando se pone en la posición ON (Encendido). Un LED rojo en el interruptor de encendido se ilumina cuando se proporciona corriente.
MAX® Series ESPECIFICACIONES MAX 158 Potencia tasada: 15 vatios RMS a 4 ohmios, nominal a 1 kHz, 120 VAC line Consumo de Potencia: (Doméstico) 50 vatios, 60 Hz, 120 VAC (Exportado) 50 vatios, 50/60 Hz, 220-240 VAC Las siguientes especificaciones han sido medidas a 1 kHz con todos los controles de preset a 5; sonido “Modern”: Sensibilidad de entrada: Nivel de Entrada Nominal (Modern): -12.4 dBV‚ 240 mV RMS Nivel de Entrada Máximo: 6.0 dBV‚ 2.
MAX® Series ESPECIFICACIONES MAX 112 Potencia tasada: 40 vatios RMS a 8 ohmios, nominal a 1 kHz, línea de 120 VAC Consumo de corriente: (Doméstico) 75 vatios, 60 Hz, 120 VAC (Exportado) 75 vatios, 50/60 Hz, 220-240 VAC Las siguientes especificaciones han sido medidas a 1 kHz con todos los controles de preset a 5; sonido “Modern”: Salida de auriculares: Sensibilidad de entrada: Zumbido y ruido de sistema a Nivel de Entrada Nominal: Nivel de Entrada Nominal (Modern): -15.
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: July 1, 1998 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada.
Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian, MS 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.