Mini MAX® Bass Amplifier Operating Manual www.peavey.
FCC/ICES Compliancy Statement This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, that may cause undesired operation. Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence.
ENGLISH Mini MAX® Bass Amplifier Don’t be fooled by its small size! The Mini Max® has all of the qualities that have made Peavey bass amplifiers famous worldwide for the past 50 years: class-leading power, killer tone, versatility, and ruggedness. In addition to 500 Watts of real power, Peavey’s exclusive DDT™ limiter means that every last drop of that power is clean power with no audible clipping. This not only sounds better, it puts less strain on your speaker cabs.
Front Panel 4 2 1 1 2 3 6 5 8 7 13 10 9 11 12 14 15 ACTIVE/PASSIVE PICKUP Inputs These 1/4" inputs are included so you can choose the appropriate setting for your instrument. The gain structure of the amplifier is modified to accommodate the outputs of different pickup configurations. GAIN This knob controls input level of the instrument.
12 13 TUNE/MUTE Pressing this button will engage the chromatic tuner while muting the output to the speaker. The LED screen will indicate which note is being played while the red and green LEDs above the screen indicate whether the note is flat (red), sharp (red) or in tune (green). This switch also mutes the DI. AUX INPUT This 1/8" input jack allows you to connect a CD player or MP3 player to your MAX Series bass amp and play along 14 HEADHPHONE OUTPUT 1/8" headphone output for personal monitoring.
18 LINE VOLTAGE SELECT SWITCH This selector switch allows the amplifier to be operated at different line voltages. Please be sure this switch is set to the proper voltage for your area before connecting the amplifier to a power source or turning the amplifier on for the first time. NEVER CHANGE THE POSITION OF THIS SWITCH WHILE THE AMPLIFIER IS TURNED ON. CAUTION! THE FUSE MUST BE CHANGED TO THE CORRECT VALUE PRINTED ON THE REAR OF THE CHASSIS IF A DIFFERENT LINE VOLTAGE IS SELECTED.
Mini MAX® AMPLIFIER SPECIFICATIONS POWER CONSUMPTION: (1/8 rated power, 1KHz sine wave) 120vac/60Hz, 230vac/50Hz 160 Watts POWER AMPLIFIER: (Rated Power < 1% THD, 1KHz sine wave, nominal line) 500 Watts continuous into 4 ohms (minimum load) 300 Watts continuous into 8 ohms PRE-AMPLIFIER: Maximum Input Sensitivity: (PRE GAIN = 10, LOW/MID/HIGH = 5, VOLUME = 10, all voicing switches defeated) Passive Input Active Input Auxiliary Input 40mV / -25.74dBu 110mV / -16.95dBu 1.0V / 2.
NOTES
NOTES
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: 11/01/2011 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada.
U.S. customer warranty registration. Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.
FROM: Place Postage Here Peavey Electronics Corporation Attn: Warranty Department PO Box 1150 Meridian, Ms 39305
