User's Manual

SPECIFICATIONS
Diaphragm Type:
Diamond-coated
Element Type:
Dynamic
Magnet Composition:
Neodymium Iron Boron
Polar Pattern:
Hypercardioid
Front-to Back Rejection:
15 dB (typical)
Impedance:
400 ohms, balanced
Frequency Response:
45 Hz to 16 kHz
Sensitivity:
-51 dB (1 Pa = 94 dB SPL)
(Load=2KΩ)
Open Circuit Voltage:
-48.8 dB (1 Pa = 94 dB SPL)
Maximum:
SPL 140 dB
Case (Housing):
Die-cast zinc
Finish:
Black rubberized paint
Pop Filter:
Dual integral open cell foam
Phasing:
Positive (inward) pressure on
diaphragm produces positive voltage at
Pin #2.
Weight:
9.92 oz. (281 grams)
FEATURES
• Diamond-coateddiaphragm
• Neodymiummagneticdesign
• Hypercardioidpolarresponse
• Smooth,accuratefrequency
response
• Ultra-highsensitivity
DESCRIPTION
Thank you for choosing the Peavey
PVM
46 diamond-coated micro-
phone. The PVM 46 is a dynamic
hypercardioid incorporating a neodym-
ium magnet that has more than twice
the sensitivity of conventional micro-
phones, and with the diamond-coated
diaphragm,transientandfrequency
response become flawless. The hyper-
cardioid polar response is one of the
most popular patterns in the industry
for micing instruments. The slightly
narrower on-axis polar pickup affords
the vocal user less bleed-over from
other instruments or vocals. The rear
reflection of the PVM 46 is typically
15 dB less sensitive than the on-axis
response. This helps to reduce feed-
back from stage monitors and back-
ground noise. The hypercardioid pat-
tern also makes micing easier when
trying to get a good sound on non-
electric instruments.
The amorphous diamond-coated dia-
phragm is patented technology that
coats the diaphragm with a super-thin
layer of diamond that offers many
advantages over conventional laminat-
ing or other coating materials. Mainly,
it improves the stiffness of the large
diaphragm. In return, it keeps the dia-
phragm super stiff but ultra-light, which
isneededforextendedhighfrequency
response and sharp crisp highs.
The most significant advances in the
microphones industry have been made
through the utilization of high-tech
polymers. We are proud to say that we
are always at the forefront of this
industry by searching out and utilizing
PVM
46
Diamond Series
Microphone
SPECS
PEAVEY ELECTRONICS

Summary of content (4 pages)