Users Manual

5
T5 AL/250V 100-240V~ 50/60Hz
FUSE
Power Consumption : 40W
Consumo de energia 40Wh
M/N: LN1063
Electronics Corp.
Peavey
LN1063
Peavey Electronics Corp.
5022 Hartley Peavey Drive
Meridian, MS 39305
[phone]
www.peavey.com
POWER
CH1
AUX
PAIR
POWER/LIMIT
CH2 CH3/4 CH5/6 MASTER
REVERB
ON
Designed and Engineered in U.S.A.
Made in China
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
--Apparatets stikprop skal tilsluttes en stikkontakt med jord,
som giver forbindelse til stikproppens jord. (For Denmark Only)
--Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan. (For Finland Only)
--Apparatet må tilkoples jordet stikkontakt. (For Norway Only)
--Apparaten skall anslutas till jordat uttag. (For Sweden Only)
CAUTION
AVIS:
VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
WARNING:
SHOCK, THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN
OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS
REMPLI DE LIQUIDE, TEL QU’UN VASE, NE DOIT ETRE POSE
SUR CELUI-CI.
DANS LE BUT DE REDUIRE LES RISQUES D’INCENDIE
OU DE DECHARGE ELECTRIQUE, CET APPREIL NE DOIT PAS
ETRE EXPOSE A LA PLUIE OU A L’HUMIDITE ET AUCUN OBJET
AVIS:
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
REVERB
MIN MAXMIN MAX
LEVEL
MIN MAX
HIGH
-12 +12
LOW
-12 +12
LEVEL
MIN MAX
HIGH
-12 +12
LOW
-12 +12
LEVEL
MIN MAX
LEVEL
MIN MAX
LEVEL
MIN MAX
HIGH
-12 +12
LOW
-12 +12
I4S-LN1063
3642A-LN1063
Top Panel
1
2
3
8
4
5
7
6
(1) Channel Reverb Control
is knob controls the amount of reverb for the corresponding channel (channels 1-2).
(2) High EQ (treble) Control
is is an active tone control (shelving type: +/-15dB) that varies the level of the high frequency range.
(3) Low EQ (Bass) Control
is is an active tone control (shelving type: +/-15dB) that varies the level of the low frequency range.
(4) Channel Level
is knob controls the level of the specic channels audio in the mix.
(5) Bluetooth/Aux Input Switch
is switch selects the audio source for channel 5/6. Push to the le to route the Bluetooth signal to the channel.
Push to the right to route the Aux input from the 3.5mm Stereo Jack (12) to the channel.
(6) Pair Button/LED
is button is used to pair a phone or Bluetooth source to the speaker. e LED will indicate if it is in discovery
mode (blinking) or paired to a Bluetooth source (solid). Pushing the button turns on the Bluetooth and places the
speaker in discovery mode (blinking LED). Now you should be able to connect any Bluetooth audio source to the
6