Operation Manual

INPUT JACK

Plug your bass into this 1/4" jack. Connect your bass prior to turning on the power switch.

VINTAGE

This control introduces patented Peavey TransTube

circuitry, with an EQ curve that simulates the sound

of a vintage tube bass amp. Increase the amount of “tube like” distortion/compression by turning the

knob clockwise.

VINTAGE ON/OFF

This push button switch allows you to turn the Vintage control on and off.

GAIN

This control sets the overall volume level of the MAX 126.

HIGH EQ

This control allows you to dial in high frequencies or “treble” sounds for your bass.

LOW EQ

This control adds bottom end to your sound. Use this control for low sounds or to add more “oomph”

to your bass.

AUX/LINE IN

This standard 1/4" input jack allows you to connect a tape or CD player to your MAX 126 and play

along.

HEADPHONE JACK

This standard 1/4" input jack allows you to connect standard headphones to the MAX

126. Turn the

Vintage and Gain controls all the way down before using headphones. Slowly turn up the volume and nd

a comfortable listening level. When headphones are connected to the MAX 126‚ the speaker is automati-

cally turned off.

POWER LED

This LED illuminates when power is supplied to the MAX 126.

POWER SWITCH

This two-way rocker switch applies power to the unit when placed in the ON position.

Front Panel MAX

126