Users Manual

7
Bluetooth
(12) Bluetooth Pairing
Use this button to link your Bluetooth source (phone, tablet, etc...) to the speaker. See Bluetooth operation below.
(13) Bluetooth Stereo Link
Use this button to link your speaker to second PB 1/2/3BT speaker. See Bluetooth operation below.
Bluetooth Operation:
Pairing: To pair your bluetooth source to the speaker, use the following steps:
1. Press mode button on the back of the speaker to make the speaker discoverable. e pair
ing LED should start blinking.
2. Go to your devices bluetooth screen and select the available Peavey speaker. Once paired,
the pairing LED should light continuously.
Stereo Linking: To link two compatible P1/2/3BT speakers, use the following steps:
1. First, use the previous steps to pair your Bluetooth device to the rst speaker.
2. Press Pairing on the second speaker to turn the Bluetooth on.
3. Press Stereo Link button on both speakers. Once the connection has been made, the Stereo
Link LED 's on both speakers should be on continuously.
4. To disconnect, press the Stereo Link button again on either speaker.