Specifications

Loudspeaker System Specifications
30
 On the primary speaker, use the "push for DSP" knob to navigate to
the "LINK", push in the knob to activate the linking action. See Fig.
40.
Fig. 40 Link parameter selected
 Once they connect, the primary speaker will be the Left channel
and the secondary speaker will be the Right channel. The
Left/Right signals can be swapped within the app.

Primary Secondary
Fig. 41 Fig. 42
In order for this to work well, the Secondary speaker must be in Bluetooth®
range of the Primary speaker, and in order to have a good clean connection, it
would be wise to make sure that the Secondary speaker is well within the range
of the Primary, and that there are no metal walls, or other RF shielding structures
between the two speakers.
To add Bluetooth® streaming:
 On the primary (Left) PVX™p speaker, turn Streaming from "Off" to
"On".
 On your device, make a Bluetooth® connection to the PVX™p
speaker.
 The volume of the Bluetooth® signal will be controlled by the CH3
Level controls on each PVX™p speaker (independently).
To add App control:
 On the primary PVX™p speaker, turn App control from "Off to On".
 The App should connect to and control both linked PVX™p
speakers.